Buy this high quality multidiag PRO CDP+ from link:
Don't plug Multidiag PRO cdp+ USB cable into computer yet. We'll tell you when to do it.
a) Download from link we emailed you, and unextract AutoCom 2013.3 to your computer. Launch: DSCars_HeavyDuty_R32013
b) Select "DS150E Heavy Duty Vehicles (New VCI)" from drop-down.
c) Click "Next"...
d) Leave "Destination Folder" intact. DO NOT change the path. Just click on "Install". Let install complete. Then go to Step 2 below...
a) Go to folder: C:\Program Files (x86)\Delphi Diagnostics\DS150E Heavy Duty Vehicles (New VCI)
b) Delete entire folder called: data
a) Download from link we emailed you, and unextract Multidiag PRO cdp+ software anywhere on your computer.
b) Copy or move all files inside folder "Delphi 2014.2" to folder: C:\Program Files (x86)\Delphi Diagnostics\DS150E Heavy Duty Vehicles (New VCI)
c) Overwrite all files when it asks you to — as seen below...
Launch AutoCom from your computer. There should be a desktop icon called: DS150E Heavy Duty Vehicles (New VCI)
When you get to this screen:
a) Open up "KeyGen - AutoCom 2014.2" (from the downloaded ZIP file in Step 3a) — and enter your Serial number, inside "SN" field as seen below:
b) Choose these settings:
BRAND: Delphic) Press button "KEY".
WHAT KEY: HWKEY
d) Then copy SN into "Serial Number" field. And HWID into "Hardware key" as seen below...
e) Click on arrow to continue.
Click on button "START".
When you get this show up:
Then browse to your Desktop, and save the file "FileActivation" there.
a) Open up "Activator - AutoCom 2014.2" (from the downloaded ZIP file in Step 3a).
b) Click on "Open and Activate".
c) Browse to your Desktop and double-click on file: FileActivation
Click on "Start".
On next window, choose "No", as seen below...
Browse to your Desktop, and double-click on file: FileActivation
Software will now register and launch automatically. (Yes, it will still show 2013.3 Logo, but it is actually 2014).
When it prompts you to update the software from internet, choose NO, as seen below...
DO NOT update the software from internet, else you'll brake the license and it'll be nearly impossible to reinstall it again. In this case, you will take the result yourself, because you have been warned.
All updates will be informed by us including how-to-update instructions.
Now let's test that it's working...
a) Connect Multidiag PRO cdp+ to laptop and car.
b) Turn car ignition on.
a) Inside Multidiag PRO cdp+ software, click on: Settings > Hardware setup2014.03 newest Multidiag pro+ With bluetooth with plastic box with 4g tf card with Green PCB board! Best !
b) Select "USB/BT (Com-port)".
c) Click on "Test".
It should successfully detect your device and show something like this...
If it prompts that Firmware is out of date, then click on "Update" button and wait 10 minutes for AutoCom CDP+ unit to update. Don't disconnect it while it's updating.
When firmware is updated, you're ready to start scanning your vehicle(s).
This is the best version: 1pcb green color version, best all the time!
single Green PCB multidiag pro+ new delphi DS150e autocom CDP+, always be the best.
You can choose our DS150e, autocom CDP+, AUTOCOM CDP+ New Design, TCS CDP+, All quality promised!
If you will be scanning older OBD-1 vehicles, you may need to get extra cables for car or truck. Because AutoCom only comes with a 16-pin port (which will plug into any OBD2 car in the world — 99% of cars in the world). But if your vehicle doesn't use 16-pin port, then you need to get extra cables.
car cable set: http://www.obdautocar.com/sell-1901168-autocom-cdp-car-cable-for-tcs-cdp-pro-plus-8-cables-for-cars-tcs-cdp-pro-multidiag.html